Plenty of screws and adapters and rubbery bits to find a good place to install the cameras and remote control unit.

Due to being a loop recording device it may lock save the wrong segment of footage, so be mindful of this. If I had been running a full-time front-and-rear camera that day, I could have proven my case and had that a-hole arrested, but as it was, I had no evidence. It is no doubt that the INNOVV K5 dash cam could perform well even in harsh weather conditions with its high-end design.

This wouldn't be an issue but they are made from plastic with metal screw collars to hold them in place. Front/Back Mirroring – both front and back mirror images are selectable as Normal, Mirror or Flips (180-degrees. I started using a helmet cam while commuting to work in SoCal years ago after a car tried to run me off the road simply because I was splitting lanes (legal in California), and he didn’t want to be passed.

To get the most out of the camera’s you need to install their app, but it allows you to see the camera real-time to verify they are pointed the right direction, gain access to all your footage, play or download your footage to your phone. The waterproof (IP67 rating) uses an 8-megapixel sensor on the front camera, producing 4K Ultra HD footage at 30 FPS. PACKED WITH INDUSTRY-LEADING 5HZ GPS RECEIVER: The INNOVV K5’s GPS receiver is packed with a high update rate of 5Hz, unlike most dash cams that are packed with the conventional update rate of only 1Hz, thereby giving the K5 more detailed and higher resolution tracking capabilities. It’s straightforward and very easy, with good instructions; however, some of the wires are really short while others are much too long. As such, increasing the module interface leads by 15 to 20 cm or the individual component leads by the same amount would provide far more installation and routing flexibility.It helps to decrease display lag time and improves distance measurements and tracking, especially when moving on a curvy route at high speed. Looking ahead – once the plastic is removed all the component leads will be properly routed under the plastic along frame or sub-frame runs to keep everything out of the way and hidden.

And it is also good to remember that some settings are dynamic (the system updates immediately) whereas other setting changes do not take effect until the K5 is restarted. Documentation – is in the usual INNOVV form and standard – succinct but good, but the somewhat complex component and connectivity diagram and the motorcycle installation layout view need to be larger and more colour detailed. Pass 2 – power the system up again and on this second pass you should see the GPS and WiFi LEDs on the remote control pulse for a few seconds, the GPS blinks a short sequence, the system appears to reboot, then all three LEDs come back to life; the new FW is now resident – indicated by the fact that the WiFi Password, if changed, is now back to its default.The K5 Front and Rear Motorcycle Camera by Innovv is a game changer for riders looking for a hassle-free way to capture their adventures. With the pre-release INNOVV K5 here and after almost three months of poking, prodding, installing, and use, many of the original questions are now answered, either formally or from use.

And so far, using the pre-release INNOVV K5 system remains a positive experience and it seems the INNOVV team is well along the way in finalizing the K5 and readying it for a formal release.For features with additional settings or options, the current setting and a greater than (angle bracket >) is displayed on the right side of the screen – tapping this brings up the options listing. Once installed, however, everything was neatly tucked away and only the most astute observers will be likely to notice the camera’s. If some devices experience difficulties in discovering the K5 LAN ID, try putting the device into Airplane or Travel mode to restrict external or internet connectivity and then turn on (just) the WiFi – the K5 LAN ID should appear and be connectable. Bench Testing – didn’t bring any surprises, but it did generate a number of positive observations regarding how well the system goes together and works together as a system; and the WiFi local network connectivity works first time, all the time. This small module, once outside or inside placement is determined, is easily mounted with the adhesive pads in the kit or alternatively, 3M Dual Lock or hook-n-loop pads, both being plenty strong and less permanent.